Bayan
Akutnhom de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ̈c de kɔc cï puɔ̈ɔ Ka fara o kan, a bɛ se ka kɛ̈ɛ̈r ye kɔc ye luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de luɔɔi de lu
Features of baara:
◇ Sisitɛm alëu bï ya luɔ̈ɔ̈i në monomab, vaccine wala pharmaceutical protein test wala luɔɔi de suspension culture, microcarrier culture, bï ya luui në kaam tök
◇ Suspension and micro-carrier culture propelled stirring paddle or lifted stirring paddle, low shear force, mixed cycle time short, mixed effect good
◇ Deep micro-bubble direct ventilation / no-bubble ventilation device, oxygen transfer effect is good, satisfying high density cell culture requirements, while reducing the harm to cells
◇ ye tɔ̈u në kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam
◇ On-site sterilization sampling / sampling valve group, ensure operation safe, reliable, and convenient
◇ Input/exhaust gas filter sterilization can be carried out independently, satisfying the cultivation process replacement filter. ◇ Input/exhaust gas filter sterilization can be carried out independently, satisfying the cultivation process replacement filter. ◇ Input/exhaust gas filter sterilization can be carried out independently, satisfying the cultivation process replacement filter
◇ CO2/O2/AIR flow adopts thermal mass flow controller, achieve automatic control of gas flow feedback
◇ Oxygen dissolved control can use AIR/O2 or AIR/O2/N2 mode, oxygen dissolved control uses unique PID control logic, control stability accurate
◇ Deep ventilation and surface ventilation use different control methods in sterilization, ensuring sterilization completely, no dead corner
◇ Deep ventilation use hardware and software combined to effectively eliminate cultured liquid reverse flow, eliminating dyeing bacteria risk. (Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye)
◇ PH control adopts time judgment, it can prevent CO2 and alkali pairing with each other. ◇ PH control adopts time judgment, it can prevent CO2 and alkali pairing with each other. ◇ PH control adopts time judgment, it can prevent CO2 and alkali pairing with each other
◇ Permeable pump control interface, use external moving permeable pump, easy to replace
◇ Pipe, frame adopt open design, use, maintenance easy
◇ Pipeline adopts 3A standard, complies with GMP and BPE requirements. Pipeline adopts 3A standard, complies with GMP and BPE requirements. Pipeline adopts 3A standard, complies with GMP and BPE requirements.
◇ Mixing paddle connection seal inside tank without dead corner, easy to clean
◇ Tukuŋ pip tɔ̈u në ɣän puɔth yiic, ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
◇ Material import and tank bottom valve can be sterilized separately ◇ All the same pipe and three-way interfaces within the tank body to meet the 3D requirements ◇ All the same pipe and three-way interfaces within the tank body to meet the 3D requirements ◇ All the same pipe and three-way interfaces within the tank body to meet the 3D requirements
◇ double mechanical sealing, sterilization on site; Wala magnetic stirring
◇ PLC control system ◇ servo motor, torque ye dɔɔni, baara ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r
◇ Software ye baara strong, ka parameter setup, display control, parameter detection, curve analysis, storage, output printing, etc.
◇ Sisitɛm ye tɔ̈u në e-signature, ye gam në GMP audit requirements
Map of Site Implementation
Parameters teknis
QC Pro-40/75/150X
Tank |
Total Volume |
40L |
75L |
150L |
Baar volume |
30L |
50L |
120L |
|
Diameter ratio |
1:1.2 |
1:1.2 |
1:1.2 |
|
Materiɛl |
316L SS |
|||
Polishing |
Kɔnɔ: 0.2 ~ 0.4μm; Yɔ̈ɔ̈r: 0.8μm |
|||
Standart looi |
ASME、PED、GB D1/D2、ISO9001:2000 |
|||
Material 316L stainless steel, jacket 304 stainless steel Polishing surface contact with material precision Ra≤0.4 Tɔŋ ye looi: 0.3MPa, tɔŋ ye looi: 0.25MPa Configuration of interface: Safety mirror light, side mirror, window, supplement valve set interface, foam sensor interface, pressure sensor interface, in-bit sampling port, air inlet, bottom valve, vaccination valve set interface, alkali-added interface, safety blast sheet |
||||
Mix |
Waya |
Top/bottom mixing, dual mechanical or magnetic drive, PID control, clean air lubrication (mechanical sealing) ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl |
||
Speed ye kɔlɔ |
25~250rpm,±1rpm |
|||
Nyuɔ̈th |
Yi'a, ±1rpm |
|||
Paddle ye kɔlɔ |
Plow Mixing Pad |
|||
Testing probe |
PH |
2~12, PID control, accuracy: ±0.1, connected with alkali, CO2 |
||
DO |
0 ~ 200%, PID control, accuracy: ± 1%, connected with O2, Air |
|||
Liquid Level |
Stainless steel probe, PID control |
|||
Temperatur |
Pt100, PID control, digital, ±0.1 ℃ |
|||
Kontrol gas |
Lɔ̈ɔ̈m de flow |
Thermal Flow Mass Flow Controller |
||
Gas |
4 gas control system (N2, O2, CO2, Air), electromagnetic valve control |
|||
Filter ye kɔnɔ |
0.2μ, Polytetrafluoroethylene |
|||
Filtrɛr gasi |
0.2μ, Polytetrafluoroethylene |
|||
Gas kondensator |
316L stainless steel |
|||
Ajuiɛɛr Pressure |
Sisitɛm ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r |
|||
Liquid flow plus |
Pump 2 ye rot |
Traffic ye kek mat; Pump ye rot waar: ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar në rot ye rot waar |
||
Temperatur |
Kontrol |
PID, Automatic sterilization; Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ |
||
Temperature control accuracy: |
Nyuɔ̈th tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n |
|||
Temperature range: |
Pii ye cɔl 5℃ ~ 65℃ |
|||
Sistem Kontrol |
Programmable Logic Controller ye luɔɔi |
|||
Ajuiɛɛr Configuration |
Weighing, tank cap automatic lifting |
|||
Voltage/Power (Voltage/Power) |
AC380V 3-phase 5-wire, 15Kw |
|||
Pii, gas, koom |
Pii ye looi: 0.15MPa Pii ye cɔl cooling water temperature: Not higher than 30°C Lɔ̈ɔ̈i ye cɔl air pressure: 0.2MPa Lɔ̈ɔ̈i de koom: 0.18MPa (ka dhil ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u) |