Automatic cup punching plate forming test machine

Product category: Cup punching sheet forming testing machine
Product Name: GBS-100 type automatic cup punching plate forming test machine
GBS-300A type automatic cup punching plate forming test machine
Kä ye looi:
1, GB4156-84 <unk>Metal cup burst test method<unk>
2, GB5125-85 "Metode de teste de cup de metal coloré"
GB/T15825.1~15825.8--1995 <unk>Metal thin sheet forming performance and testing method<unk>
GB2611-92 "General Technical Requirements for Testing Machines" (Kä ye looi në teknoloji ye looi në masin de them)

I. Kä ye looi ku kä ye looi
Stamping production is one of the fundamental methods of plastic processing, and it is widely used in aerospace aviation, transportation machinery industry, and electronic electrical appliances and so on. Stamping production is one of the fundamental methods of plastic processing, and it is widely used in aerospace aviation, transportation machinery industry, and so on. A ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈ Tɛmɛ wɛrɛw ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ Walasa ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛ
Masin kënë ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈ Ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ Ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ.
Lɔ̈ɔ̈m ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l. Lɔ̈k bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i. Në kë de biäk de stamping ye looi, a lëu bï ya looi:
1, axis symmetry deep test;
2, ye tɛmɛ de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r;
3, kɔn cup test;
4. Cam ear test;
5, tɛmɛ kɛ̈ɛ̈r kɛ̈ɛ̈r kɛ̈ɛ̈r kɛ̈ɛ̈r kɛ̈ɛ̈r;
Cup rupture test, i.e. with a specific specification of steel ball or spherical punch, when the sample surrounding is applied with a certain clamping force pressure, steel ball or spherical punch applies pressure to the sample, until the sample produces a penetrating crack, when the punch presses into depth (mm), i.e. for the tested plate's cup rupture value IE, this cup rupture value is used to judge the material's plastic deformation performance.
Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ
Testing of sheet forming, can measure metal thin sheet flatness performance indicator cup protrusion value IE (execution GB-4156), measure stretch performance indicator limit stretch ratio LDR or load limit stretch ratio LDR (T), measure expansion performance indicator expansion rate λ, measure "stretch + flatness" composite forming performance indicator cone cup value CCV, measure specific forming performance indicator camear rate e, measure surface limit main stress variable to measure drawing sheet forming limit chart (FLD).

II. Model de masin ku paramètre technique

1, GBS-100 type automatic cup punching and plate forming tester main technical parameters
Serial Number Technical Specifications Name Technical Specifications Note

Serial No	Nyuɔ̈ɔ̈r Technical Specifications	Teknik Specifications	Kommentar
1	Standard cup burst test sheet thickness	0.2—3mm	Yïïn ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n
2	Thickness of non-standard cup burst test sheet (Thickness of non-standard cup burst test sheet)	0.2—4mm
3	Largest width of sheet	100mm
4	Punch maximum run	60mm
5	Kuen piston	19-21mm
6	Load de stampage maximum	100KN
7	Max clamping load	40KN
8	Deformation measurement accuracy	1%
9	Load precision	±1%
10	Standard cup punch head specifications	SΦ20±0.05	ф27±0.05mm
11	non-standard cup bump head specifications	Sф15±0.05mm Sф8±0.02mm Sф3±0.02mm	Order spesial
12	Metal ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ	Thickness: 0.1-3mm	Order spesial
13	Cam Mould Lifting Mould	φ50mm	Thickness > 0.91-1.3mm Thickness 0.45-0.64mm Thickness > 0.64-0.91mm
14	Tension Test Mold	φ50mm	Thickness > 0.91-1.3mm Thickness 0.45-0.64mm Thickness > 0.64-0.91mm
15	Expansion Test Mould	φ25-0.05 mm φ40-0.05，mm	Thickness > 1.00-2.00mm Thickness 0.20-1.00mm
16	Cone Cup Test Mould	φ12.70，mm φ17.46，mm	Tɛɛr ye 0.5-<0.80mm Tɛɛr ye 0.8-<1.00mm
17	Cam Test Mould	φ32-0.05mm	Thickness 0.1-2.00mm

2, GBS-300 type automatic cup punching and plate forming tester main technical parameters

Serial No	Nyuɔ̈ɔ̈r Technical Specifications	Teknik Specifications	Kommentar
1	Standard cup burst test sheet thickness	0.45-4mm	Yïïn ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n
2	Thickness of non-standard cup burst test sheet (Thickness of non-standard cup burst test sheet)	0.45-4mm
3	Largest width of sheet	180mm
4	Punch maximum run	100 mm
5	Kuen piston	21-31mm
6	Load de stampage maximum	300KN
7	Max clamping load	100KN
8	Deformation measurement accuracy	1%
9	Load precision	±1%
10	Standard cup punch head specifications	SΦ20±0.05	ф27±0.05mm
11	non-standard cup bump head specifications	Sф15±0.05mm Sф8±0.02mm Sф3±0.02mm	Order spesial
12	Metal ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ	Thickness: 0.1-4mm	Order spesial
13	Cam Mould Lifting Mould	Kuen: φ50mm Diameter wɛ̈t φ51.8mm φ52.56mm φ53.64mm φ55.20mm φ57mm	Thickness 0.45-0.64mm Thickness > 0.64-0.91m Thickness > 0.91-1.3mm Thickness > 1.3-1.86mm Thickness > 1.86-2.50mm
14	Tension Test Mold	Kuen: φ50mm Diameter wɛ̈t φ51.8mm φ52.56mm φ53.64mm φ55.20mm φ57mm	Thickness 0.45-0.64mm Thickness > 0.64-0.91mm Thickness > 0.91-1.3mm Thickness > 1.3-1.86mm Thickness > 1.86-2.50mm
15	Expansion Test Mould	Kuen: φ25mm φ40mm，φ55mm Diameter: φ27 mm φ44 mm φ63 mm	Thickness 0.20-1.00mm Thickness > 1.00-2.00mm Thickness > 2.00-4.00mm
16	Cone Cup Test Mould	Kuɛl φ12.70, mm φ17.46，mm φ26.99 mm φ20.64，mm	Tɛɛr ye 0.5-<0.80mm Tɛɛr ye 0.8-<1.00mm Thickness > 1.00-2.00mm Thickness > 2.00-4.00mm
17	Cam Test Mould	Kuɛl φ32-0.05mm Diameter dɔ̈ŋ: φ32.28，φ32.35，φ32.43，φ32.50，φ32.60，φ32.75，φ32.90，φ33.05，φ33.20，φ33.35，φ33.50，φ33.80，φ34.10，φ34.50，φ35.00，φ35.60，φ36.30，φ37.00，φ38.50，φ39.80。	Thickness 0.1-3.00mm

Third, Main Structure and Working Principles (Tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr)
The machine adopts hydraulic clamping, stamping, stamping speed can be pre-adjusted, also can be manually controlled, the cup burst mold loading and unloading sample is convenient, after the sample is delivered, press the automatic button to complete clamping, stamping, the sample appears crack automatically parking, and it is easy to observe the crack, there is a peak memory function, i.e. maximum stamping pressure, deformation height automatic memory. Deformation depth, stamping pressure display can use a digital meter, touch screen or computer display, button operation, you can pre-set the deformation depth value. Deformation depth, stamping pressure display can use a digital meter, touch screen or computer display, button operation, you can pre-set the deformation depth value. Masin kënë alëu bï ya tɔ̈ɔ̈u në kä juëc cï kek ya nyuɔɔth, ku jɔl ya kä ye kek ya nyuɔɔth, ku jɔl ya kä ye kek ya nyuɔɔth, ku jɔl ya kä ye kek ya nyuɔɔth.
1、Test machine control principle
Masin kɔnɔ ye tɛmɛ digital device ye nyuɔɔth kä ye kek tɔ̈ɔ̈u, kä ye kek tɔ̈ɔ̈u, kä ye kek tɔ̈ɔ̈u, kä ye kek tɔ̈ɔ̈u. A lëu bï ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈ Në kë wɛ̈t ye raan tɔ̈u thïn wïc, masin kënë alëu bï microcomputer looi bï ya luui ku bï ya data tɔ̈ɔ̈u. Model ye GBS-60W microcomputer control automatic cup burst testing machine.
2 Karakteristika produk:
(1) Sample deformation, stamping load XLCD touch screen display (wala computer display)
(2) Pike memory function
(3) ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot
(4) Lɔ̈ɔ̈i de kä ye kek tɔ̈ɔ̈u
(5) Thickness of stretch (cup pitch value), using a grating gauge (displacement sensor), its reading resolution can reach 0.01mm. (5) Thickness of stretch (cup pitch value), using a grating gauge (displacement sensor), its reading resolution can reach 0.01mm. (5) Thickness of stretch
(6) Clamping load pressure touch screen ye nyuɔɔth
(7) flip-type clamping, make the punch replacement easy, sample loading and unloading very easy
(8) Masin kënë anɔŋ keys ye kɔc lui
(9) Në kë de raan cï luɔɔi ye kuanycök, masin kënë alëu bï ya naŋ kɔmpiöta (485), kɔmpiöta ye luɔɔi, ku jɔl ya software ye kɔmpiöta ye kɔmpiöta ye kɔmpiöta ye kɔmpiöta
(10) Masin ye tɛmɛ <1300mm × 800mm × 1300mm (ye tɛmɛ)